Skilled operation of the loader for loading and unloading activities is not only about clarifying various mechanical functions, but also about operating the machine skillfully and relying on experience or usage specifications to reduce the loss of equipment during the loading and unloading process. The relevant operation instructions are as follows:
1. When the engine water temperature and lubricating oil temperature of the loader reach the specified value, the full-load operation can be carried out. When the water temperature or oil temperature is higher than 363K (90 degrees), it should be stopped and the reason should be found. When the water temperature is lower than 363K (90 degrees) Only work, otherwise it will damage the engine.
2. When the loader is operating, it is forbidden to shovel goods when the front and rear car bodies form an angle. Before picking up the goods, the front and rear car bodies should be formed in a straight line, aligned and close to the cargo pile, and at the same time, the bucket should be parallel to the ground, and then the goods should be picked up.
3. During the loading and unloading operation, except for bulk grains, it is not allowed to use the high-speed gear to pick up the goods.
4. It is not allowed to lift the bucket while driving.
5. The bucket and shovel load should be balanced, and the bucket is not allowed to load the goods too heavily.
6. The loading truck is a vehicle used for loading and short-distance transportation of bulk materials. It is forbidden to use a bucket for excavation.
7. Before leaving the vehicle, the driver should put the bucket on the ground. It is forbidden for the driver to leave the vehicle when the bucket is suspended.
8. It is strictly forbidden to stand under the lifted bucket or perform maintenance operations. If the vehicle is overhauled when the bucket is lifted, support measures should be taken for the bucket to ensure stability.
9. It is forbidden to use buckets to lift personnel to engage in high-altitude operations.
10. It is forbidden to directly shovel and load the materials on the ship on the shore of the wharf.
11. When working under the overhead pipeline, be careful not to touch the obstacles above when the bucket is lifted. When working under the high-voltage transmission line, the bucket should also keep a safe distance from the transmission line.
12. When dumping materials for a truck, do not scrape the vehicle when the bucket is turned forward, and the unloading action should be gentle. When unloading the truck, care should be taken that the bucket does not scratch the carriage. During the pushing or leveling operation, the operation situation should be observed, and if the vehicle is found to be blocked, it should be operated with caution and not forcibly moved forward.
