The main components of the small loader include the engine, torque converter, gearbox, front and rear drive axles, referred to as the four major components. After we understand the main components, we will investigate and measure the quality of the small loader, which is very important for the correct choice. s help!
What are the main components of a small loader
1. Engine: The engine is equivalent to the "heart" of a small loader. If the heart is not strong enough, there will be many problems during use. The engine adopts an engine, especially for the mine type and coal mine type with special requirements, all imported engines are used. , to ensure the quality of the loader.
2. There are three pumps on the torque converter, the working pump (supplying lift, dump bucket pressure oil), the steering pump (supplying steering pressure oil), the variable speed pump, also known as the traveling pump (supplying torque converter, gearbox pressure oil), some models The steering pump is also equipped with a pilot pump (supplying pilot pressure oil for the control valve).
3. Working hydraulic oil circuit, hydraulic oil tank, working pump, multi-way valve, lift cylinder and dump cylinder.
4. Traveling oil circuit: gearbox oil sump oil, traveling pump, all the way into the torque converter and one way into the gear valve, transmission clutch.
5. Drive: drive shaft, main differential, wheel reducer
6. Steering oil circuit: fuel tank, steering pump, steady flow valve (or priority valve) steering gear, steering cylinder.
7. There are two types of gearboxes: integrated (planetary type) and split (fixed shaft type).
The above content describes the main components of the small loader. After reading today's content, we will be familiar with this type of equipment. We will update the relevant product introduction to our friends in the future. If you have any questions, please feel free to contact us.
